游侠NETSHOW论坛

标题: 使命召唤5机器人模组(Xiao Vin荐)不支持COD5中文 [打印本页]

作者: vincenttwc 时间: 2009-6-13 17:35:07 标题: 使命召唤5机器人模组(Xiao Vin荐)不支持COD5中文

支持中文使命召唤5 机器人 002p 發佈
http://game.ali213.net/thread-2758291-1-1.html
本post 將會結束。

Vincenttwc 於游侠NETSHOW论坛發佈

=============================================
使命召唤5 bot由Pezbot Team开发
Vincenttwc并没有参与开发
Vincenttwc只于中国区协助宣传及推广(Powered by Pezbot Team)
COD5 Bot中文教学由Vincenttwc重新编写
=============================================

此版本由Pezbot Team于5月28日发布001p

暂不支持游侠汉化组&使命召唤中文站联合发布之使命召唤5中文版(因为是COD5 v1.4)
暂时只支持v1.0-v1.3 ，不支持COD 5v1.4

==========使用Bot教学=========By Xiao Vin中国区协助宣传及推广

1) XP解压到"C:\Documents and Settings\<username>\Local Settings\Application Data\Activision\CoDWaW\mods\"
1) Vista解压到C:\Users\Vincenttwc\AppData\Local\Activision\CoDWaW\mods\
2) 建立Bot模组启动快捷径+set fs_game mods/PeZBOTWAW
"C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe" +set fs_game "mods/PeZBOTWAW"

3)进入游戏- >建立服务器
4)进入服务器 /svr_pezbots 10
5)加入Bot指令 /svr_bots 10
---注： 10 = Bot数量
6)按Esc -> Call Vote投票换地图或......

COD5 Bot中文教学由 Vincenttwc 重新编写

指令
svr_pezbots 10
svr_pezbots_team //队伍分配team to put bots on, "axis", "allies", "autoassign"; (defaults to "autoassign")
svr_pezbots_skill //简单/困难......global skill level that effects all bots, value between 0 and 1, 1 being highest
//0至1 1是最难svr_pezbots_skill 1

COD5 Bot中文教学由Vincenttwc重新编写

相关使用方法可参考Vincenttwc一年前所发布COD4 bot教学

Xiao Vin网盘下载900kb
点我下载Vincenttwc于中国区协助宣传及推广的COD5 BOT
http://www.brsbox.com/XiaoVin

=================================================
=================================================

简易重点(汗！ )001p不支持COD5 v1.4

确定文件位置
1) XP解压到"C:\Documents and Settings\<username>\Local Settings\Application Data\Activision\CoDWaW\mods\PeZBOTWAW\PeZBOTWAW.iwd"
1) XP解压到"C:\Documents and Settings\<username>\Local Settings\Application Data\Activision\CoDWaW\mods\PeZBOTWAW\mod.ff"

1) Vista解压到C:\Users\Vincenttwc\AppData\Local\Activision\CoDWaW\mods\PeZBOTWAW\PeZBOTWAW.iwd
1) Vista解压到C:\Users\Vincenttwc\AppData\Local\Activision\CoDWaW\mods\PeZBOTWAW\mod.ff

2)复制你桌面的COD5快捷径-->命名为COD5BOT
右键刚贴上的快捷径--->右键-->内容加上+set fs_game "mods/PeZBOTWAW"
就成了
"C:\..............\Activision\Call of Duty - World at War\CoDWaWmp.exe" +set fs_game "mods/PeZBOTWAW"

3)运行COD5BOT快捷径
4)创立服务器
5)按~输入/svr_pezbots 10
6)回车
7)Bot出来了

=================================================
=================================================

[ 本帖最后由 vincenttwc 于 2009-6-26 14:09 编辑 ]

作者: vincenttwc 时间: 2009-6-13 17:44:37

5月至今已收到不少 PM 問關於 COD5 機器人

今天有時間速寫了一編文章，上傳BOT + BOT評測

COD5 安裝及使用非常簡單，不明白的可以參考我一年前 COD4 bot 的文章
可搜尋"COD4 Xiao Vin 機器人" 即有很多本章幫你解答

================================
COD5 bot 非常吃CPU，建議開 10- 12 個就好了，19個非常Lag

================================
另外有人問我是否已轉加入 3DM 大家庭？
我的回應是：任何網站都沒有支付薪金給我，任何網站高層聯繫我幫忙，我就會到那個網站幫忙。

作者: zhangdagang33 时间: 2009-6-13 18:11:44

终于更新版出来了，这次应该支持1.4了吧

作者: zhoubuffon 时间: 2009-6-13 19:09:41

我严重支持你的BOT 呵呵

作者: lwxlovemm 时间: 2009-6-13 19:48:50

终于有了，非常感谢

作者: lwxlovemm 时间: 2009-6-13 20:44:34

楼主我出错了
地图载入完后出现错误，内容如下
Server script compile error
unknown function
(see console for details)
怎么回事其他mod都没问题我的cod4 bot 也使用正常
我发现cod5多人模式的模组选项里什么都没有其他mod也都看不到但可以载入
cod4的多人模组选项里可以看到所有模组而且启动时不用加参数进去后直接选一个mod 就可以自动载入

作者: lwxlovemm 时间: 2009-6-13 20:52:54

原帖由 vincenttwc 于 2009-6-13 17:44 发表
5月至今已收到不少 PM 問關於 COD5 機器人

今天有時間速寫了一編文章，上傳BOT + BOT評測

COD5 安裝及使用非常簡單，不明白的可以參考我一年前 COD4 bot 的文章
可搜尋"COD4 Xiao Vin 機器人" 即有很多本章幫你解答
...

楼主的截图怎么是 1.1 版？？？

作者: vincenttwc 时间: 2009-6-13 21:43:08 标题: 回复 #8 lwxlovemm 的帖子

因為已沒有玩 cod5 很久了

Re:cod5多人模式的模组选项里什么都没有其他mod也都看不到
mod 看不到没有选项

我快捷徑是
"H:\Game\Activision\Call of Duty - World at War\CoDWaWmp.exe" +set fs_game "mods/PeZBOTWAW"

作者: 521ztz 时间: 2009-6-13 21:55:13

楼主没有提及最重要的问题：支持1.4吗？？？？？？？？？？？

作者: lwxlovemm 时间: 2009-6-13 22:57:41

有没有1.4 中文的朋友成功使用

作者: 千濑 时间: 2009-6-13 22:58:10

我的在桌面快捷方式加入+set fs_game "mods/PeZBOTWAW"后游戏都进不去了

作者: MILA_rmb 时间: 2009-6-13 23:06:43

========================================================================
PeZBOT for WAW, version: 001p (28/5/09)
Author : PEZZALUCIFER

Any and all feedback is welcome --> perry_hart@hotmail.com
Waypoint Feedback --> lord_gannondorf@hotmail.com
Waypoint Feedback --> homelandwarrior@msn.com

Or, you can leave feedback in the forums --> http://www.moddb.com/mods/pezbot/forum
========================================================================

=================
Disclaimer/Usage:
=================

Feel free to add this source to any mod you like, just credit PeZBOT, thanks.

This is pre-alpha code, meaning it is in no way feature complete and full of bugs, use at your own risk. I will not be held responisble for any damages this mod does to your PC. (Not that it should do any.)

===========
Thanks to:
===========

Whitsel - Waypointing
Lord_Gannondorf - Waypointing

Tally
AintNoMeInTeam
NovemberDobby
AbneyPark
JamJam11
MasterB
Kill3r
Gerhart
Zeroy
AA_Fan6566
BritishBulldog1
Sparks
TL-SpacepiG
402

And thanks to all the people who have supported the mod.

===============
Things to know:
===============

- Bots have been tested and working with versions 1.1, 1.2 and 1.3 of World at War. (Please do not report any errors you get with version 1.4!)

- Cliffside and Downfall are currently not waypointed! They will be finished in the next version. (002p)

- Bots will not work in Nazi Zombie Mode! They are for Multiplayer.

- Bots will only work in Team Deathmatch and Free for All at this time.

==============
Installation:
==============

How to install on Windows XP:

1) Once you have downloaded the .zip file, extract it to the desktop temporarily.

2) Now that you have it extracted, you should have a folder called PeZBOTWAW on your desktop.

3) Right Click on the folder, and click "Copy" or "Cut".

4) Navigate to this directory (default): "C:\Documents and Settings\<username>\Local Settings\Application Data\Activision\CoDWaW"

5) In there should be another folder called "Mods", if there isn't one - create one.

6) Open the "Mods" folder, then Right Click, and "Paste" the PeZBOTWAW folder we copied earlier from the dekstop.

7) Now this is the bit that's different from PeZBOT for CoD4 - You *have to* load the mod through the command line.

8) With your desktop shortcut to World at War Multiplayer (Create one if you don't have one) you need to Right Click on it, then click on Properties.

9) You should see: "Target: C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe"

10) Add this onto the end of the target line: +set fs_game "mods/PeZBOTWAW"

11) Your target line should now look something like this: "C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe" +set fs_game "mods/PeZBOTWAW"

12) Now all you need to do, is click "Ok", then Double-Click on the shortcut and away you go.

13) When in game, to add the bots all you need to do is open up the console with the ~ key, and type /svr_pezbots # (replace # with the amount of bots you wish to have)

14) More DVARS are below - you can adjust the difficulty of the bots, etc. (You can add these onto the end of your command line)

15) One last thing - Be sure to have Punkbuster turned OFF in options, and be sure that "Dedicated" in server settings is on "No".

How to install on Windows Vista/Windows 7

1) Once you have downloaded the .zip file, extract it to the desktop temporarily.

2) Now that you have it extracted, you should have a folder called PeZBOTWAW on your desktop.

3) Right Click on the folder, and click "Copy" or "Cut".

4) Navigate to this directory (default): "C:\Users\<user>\AppData\Local\Activision\CODWaW"

5) In there should be another folder called "Mods", if there isn't one - create one.

6) Open the "Mods" folder, then Right Click, and "Paste" the PeZBOTWAW folder we copied earlier from the dekstop.

7) Now this is the bit that's different from PeZBOT for CoD4 - You *have to* load the mod through the command line.

8) With your desktop shortcut to World at War Multiplayer (Create one if you don't have one) you need to Right Click on it, then click on Properties.

9) You should see: "Target: C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe"

10) Add this onto the end of the target line: +set fs_game "mods/PeZBOTWAW"

11) Your target line should now look something like this: "C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe" +set fs_game "mods/PeZBOTWAW"

12) Now all you need to do, is click "Ok", then Double-Click on the shortcut and away you go.

13) When in game, to add the bots all you need to do is open up the console with the ~ key, and type /svr_pezbots # (replace # with the amount of bots you wish to have)

14) More DVARS are below - you can adjust the difficulty of the bots, etc. (You can add these onto the end of your command line)

15) One last thing - Be sure to have Punkbuster turned OFF in options, and be sure that "Dedicated" in server settings is on "No".

DVARS are as follows:

svr_pezbots             //number of bots; (defaults to 0)
svr_pezbots_team       //team to put bots on, "axis", "allies", "autoassign"; (defaults to "autoassign")
svr_pezbots_drawdebug    //draws bot debug info; 0 or 1; (defaults to 0) (requires developer_script set to 1)
svr_pezbots_skill       //global skill level that effects all bots, value between 0 and 1, 1 being highest
                        //0 being lowest. (defaults to 0.5)
svr_pezbots_mode       //sets the mode to start the mod in, options are "dev" and "normal" (defaults to normal)
                        //(requires developer_script set to 1 and developer set to 1)
svr_pezbots_WPDrawRange //waypoint debug draw range (defaults to 1000 inches)

=================
Waypoint Editor:
=================

In order to use the waypoint editor you must start PeZBOT in dev mode by using this as your command line:
+set fs_game "mods/PeZBOTWAW" +set developer 1 +set developer_script 1 +set svr_pezbots_drawdebug 1 +set svr_pezbots_mode dev

Waypoints are represented by a colored vertical line, links between waypoints are represented by blue lines. All waypoints have a radius around them which you have to be within to modify them. When you are in range of a waypoint the line color will pulse to let you know you are in range.

Controls:

Attack Button:---  Add waypoint.
Ads Button:------  Delete waypoint.
Use Button:------  Start Link/Confirm Link.
Frag Button:-----  Start Link/Remove Link.
Melee Button:----  Save waypoints to console_mp.log in PeZBOT mod folder.


Waypoint Colors:

Red:-------------  Waypoint with no children, this is bad, link it to another waypoint.
Purple:----------  Waypoint with one child, this is not so bad however it is a dead end, these are especially good for getting the bots to go to the right place up next to the radios in headquarters.
Green:-----------  Waypoint with more than one child, these are safe.

Usage:

You can learn how to waypoint, and add them in game from Whitsels tutorials - first, watch this video explaining how to waypoint;
http://www.moddb.com/mods/pezbot ... ontutorial#imagebox

Then read this short tutorial on how to add the waypoints in-game for use with the bots;
http://www.moddb.com/mods/pezbot ... -for-useage-release


===========
Known Bugs:
===========

- Bots may get stuck on or in geometry such as trees, etc. If you see any of this, please take a screenshot and post it on the forums: http://www.moddb.com/mods/pezbot/forum

- The "svr_pezbots_team" DVAR is a little broken, for now it's best not to use it.

==============
Revision Info:
==============

-----------------------
Version 001p (28/5/09):
-----------------------

Initial Release

作者: lwxlovemm 时间: 2009-6-14 00:31:09

那位英文好的兄弟把这段翻译一下，

How to install on Windows Vista/Windows 7

1) Once you have downloaded the .zip file, extract it to the desktop temporarily.

2) Now that you have it extracted, you should have a folder called PeZBOTWAW on your desktop.

3) Right Click on the folder, and click "Copy" or "Cut".

4) Navigate to this directory (default): "C:\Users\<user>\AppData\Local\Activision\CODWaW"

5) In there should be another folder called "Mods", if there isn't one - create one.

6) Open the "Mods" folder, then Right Click, and "Paste" the PeZBOTWAW folder we copied earlier from the dekstop.

7) Now this is the bit that's different from PeZBOT for CoD4 - You *have to* load the mod through the command line.

8) With your desktop shortcut to World at War Multiplayer (Create one if you don't have one) you need to Right Click on it, then click on Properties.

9) You should see: "Target: C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe"

10) Add this onto the end of the target line: +set fs_game "mods/PeZBOTWAW"

11) Your target line should now look something like this: "C:\Program Files\Activision\Call of Duty - World at War\CoDWaWmp.exe" +set fs_game "mods/PeZBOTWAW"

12) Now all you need to do, is click "Ok", then Double-Click on the shortcut and away you go.

13) When in game, to add the bots all you need to do is open up the console with the ~ key, and type /svr_pezbots # (replace # with the amount of bots you wish to have)

14) More DVARS are below - you can adjust the difficulty of the bots, etc. (You can add these onto the end of your command line)

15) One last thing - Be sure to have Punkbuster turned OFF in options, and be sure that "Dedicated" in server settings is on "No".

作者: ecm06034 时间: 2009-6-14 00:37:11

不知道是不是脑子笨，如何输入指令，lz能讲的再详细一点吗？
是不是在codwaw console的窗口输入呢？我在这个窗口输入后都是unkown command

作者: vincenttwc 时间: 2009-6-14 01:14:03

unkown command
是因為你沒有成功引導模組，只運行了原版

作者: lwxlovemm 时间: 2009-6-14 07:40:56

我的加的参数和楼主的一样，还是不行载入地图快完是出现
Server script compile error
unknown function
(see console for details)

作者: 千濑 时间: 2009-6-14 10:11:26

我也出现了Server script compile error
unknown function
(see console for details)
的问题，开始还能建，但是未知命令，后来看英文的解说要把两项选NO，
选后就进不去了，出现上面的代码，建不了主机！

作者: mayhem810 时间: 2009-6-14 10:23:52

同LS～～我的是1.4中文版～～是不是不支持1.4？

作者: mayhem810 时间: 2009-6-14 10:25:24

- Bots have been tested and working with versions 1.1, 1.2 and 1.3 of World at War. (Please do not report any errors you get with version 1.4!)
似乎只支持到1.3？[害怕]

作者: 千濑 时间: 2009-6-14 10:37:06

悲剧，没注意看这个！！！等出1.4的吧！！！！！！！！！！

作者: urthas 时间: 2009-6-14 13:55:16

又见小V.
以前cod4的机器人做的不错，现在codwaw的也出来了，好，赞一个

作者: karasyan 时间: 2009-6-14 14:02:47

vincenttwc 使命5还有盗版服务器没

作者: urthas 时间: 2009-6-14 14:28:49

Server script compile error
unknown function
(see console for details)

哎也是这错误。我用的也是1.4.
难道不支持1.4么？

作者: vincenttwc 时间: 2009-6-14 15:10:02

Server script compile error
unknown function
(see console for details)

剛剛發現不支持1.4[害怕]
下一版 002p 發佈時我會將次更新本 post

[ 本帖最后由 vincenttwc 于 2009-6-14 15:11 编辑 ]

作者: lwxlovemm 时间: 2009-6-14 15:57:49

果然不支持1.4[伤心啊] [伤心啊] [伤心啊]
期待更新

作者: zhangdagang33 时间: 2009-6-14 16:47:26

果真不支持1.4唉
还要再等~~~~~~

作者: mayhem810 时间: 2009-6-14 16:52:45

小V～Pezbot Team准备什么时候发布002p？

作者: fangluoren123 时间: 2009-6-14 22:23:59

支持下楼主　现在还在用ＣＯＤ４的机器人打电脑呢～～

作者: hg_7 时间: 2009-6-15 00:54:26

为什么启动了mods也输入了命令就是没有机器人出来呢，不知道跟没装那个反作弊软件有没有关系

作者: kissllove 时间: 2009-6-15 11:28:41

等待支持V1.4滴~~~~~~~~这个先收藏啦~

作者: kissllove 时间: 2009-6-15 13:06:47

顶啊顶啊~~~~~~~无限狂顶~~~~~~~~~~~~~~·

作者: cqhelijj 时间: 2009-6-15 20:37:06

还没有支持1.4的么？？
202020202020202020

作者: 绝焰 时间: 2009-6-15 20:57:35

1.4刻盘了没1.4的话没意义啊希望更新

作者: gunsou 时间: 2009-6-16 02:20:53

话说这个bot用了后发现只要呼叫轰炸之后就一直处于轰炸状态了。。。太囧了。。。

作者: btplayer874 时间: 2009-6-20 14:40:26

一个地图结束后BOTS都不见了

欢迎光临游侠NETSHOW论坛 (https://game.ali213.net/)