MSI Afterburner 4.3.0 Final

超级玩家

MSI Afterburner is ultimate graphics card utility, developed the Guru3D RivaTuner team. The Beta releases sometimes have an expiration limit, the stable and final build releases do not. We recommend using the final build 4.3.0. If you purchased a GeForce GTX 1050, 1060, 1070, 1080, Titan X (Pascal) or AMD Radeon RX 4x0 graphics card we can recommend you to at least try out this latest release.


This is the new public final release of MSI AfterBurner 4.3.0. Over the past few weeks we have made tremendous effort to get a lot of features enabled for this build. All recently release graphics cards are supported, this entails the entire Nvidia GeForce GTX Series 10 including 1050, 1060, 1070, 1080 and Titan X (Pascal). For AMD the Radeon RX series 480, 470 and 460 support is included. Not just that, we have also updated RTSS, our statistics server that enables the overlay with MSI AfterBurner to offer DirectX 12 overlay support.

New in this release is overlay support for SLI and Crossfire in DirectX 12. Please read the full release notes for all changes (as there are quite a few of them).

Revision history Version 4.3.0

    Added AMD Ellesmere and Baffin graphics processors families support
    Added Overdrive N (Overdrive 7) technology support for AMD Polaris architecture based graphics cards
    Added core voltage control for reference design AMD RADEON RX 460, AMD RADEON RX 470 and AMD RADEON RX 480 series cards with on-die SMC voltage controller
    Added memory controller usage graph to hardware monitoring module for AMD graphics cards. Currently memory controller usage monitoring is implemented for AMD Ellesmere and Baffin graphics processors families only
    Added GPU power draw graph to hardware monitoring module for AMD graphics cards. Currently GPU power draw monitoring is implemented for AMD Ellesmere and Baffin graphics processors families only
    Added “Erase autosaved startup settings” option to “AMD compatibility properties” section in “General” tab. Starting from AMD Crimson drivers family, the driver is automatically saving hardware settings (e.g. overclocking or fan control settings) in the registry and apply it at Windows startup. It makes settings of any third party hardware overclocking tool virtually permanent, meaning that applied settings stay in the system even after rebooting or powering down the system. However, such implementation is unsafe and even potentially dangerous, because you're no longer able to undo unsafe overclocking with system reboot or even driver reinstall. To prevent such situations, MSI Afterburner can now optionally erase AMD driver's autosaved startup settings after applying new settings to hardware
    Added GPU Boost 3.0 technology support for NVIDIA Pascal graphics cards:
        Added percent based overvoltage support
        Added voltage/frequency curve customization support. You may use traditional core clock slider on NVIDIA GeForce GTX 1070 and 1080 graphics cards to apply fixed offset to all voltage/frequency curve points as well as use brand new flexible voltage/frequency curve editor window for more precise per-point curve adjustment. The editor window can be activated either with “Voltage/frequency curve editor” button in the main application window or with <Ctrl> + <F> keyboard shortcut and it provides you the following features:
        You may independently adjust clock frequency offset for each point with mouse cursor or <Up> / <Down> keys
        You may hold <Ctrl> key to set anchor and fix clock frequency offset in minimum/maximum voltage point and adjust the offset of any other point with mouse to linearly interpolate the offsets between the anchor and adjustment points
        You may hold <Shift> key while adjusting the offset of any point with mouse to apply the same fixed offset to all points. That’s equal to adjusting the offset with the slider in main application window
        You may press <Ctrl> + <D> to reset offsets for all points
        You may switch between traditional core clock control slider in the main window and voltage/frequency curve editor window to see how they affect each other in realtime
        You may press <L> after selecting any point on the curve with mouse cursor to disable GPU dynamic voltage/frequency adjustment and lock the voltage and core clock frequency to a state defined by the target point. This feature allows you to test graphics card stability independently for each voltage/frequency point of the curve using real 3D applications or any stress test of your choice. In addition to stability testing usage scenario, MSI Afterburner allows you to save a curve with locked point setting to a profile, so you may easily switch between dynamic voltage/frequency management and fixed voltage/frequency settings in realtime (e.g. to achieve the maximum performance during benchmarking). Please take a note that fixed voltage and frequency settings do not allow you to disable power and thermal throttling
    Increased default maximum limits for “Core clock”, “Memory clock” and “Memory usage” graphs to improve graphs readability on NVIDIA Pascal series graphics cards
    Added configuration file switch, allowing you to toggle the source for “Power” graph on NVIDIA graphics cards. Normalized total power draw (i.e. normalized value from multiple power sensors installed on the graphics card) is selected by default per NVIDIA recommendation, however you can configure MSI Afterburner to display power draw from GPU sensor only
        Improved representation of performance limits graphs for NVIDIA graphics cards per NVIDIA recommendations:
        “Voltage limit” and “OV max limit” graphs have been merged into single “Voltage limit” graph
        “Utilization limit” graph has been renamed to “No load limit” graph
        “SLI sync” graph is now hidden on the systems with single NVIDIA GPU
        Improved representation of performance limits graphs in On-Screen Display or in Logitech keyboard LCD. Now the names or currently triggered performance limits are being displayed in On-Screen Display or in Logitech keyboard LCD instead of previously used binary limits representation form
    Community-created third party hardware database providing voltage control support on some non-MSI custom design graphics cards is now included in distributive
    Added uP1816 voltage regulators support to provide compatibility with future custom design MSI graphics cards
    Improved validation and handling of erroneous data reported after TDR or during runtime driver installation on NVIDIA graphics
    cards
    Improved clock monitoring on GPU Boost 2.0 NVIDIA graphics cards after dynamic uninstallation/reinstallation of display driver during MSI Afterburner runtime
    Added detection of runtime driver installation on NVIDIA graphics cards. Now MSI Afterburner is periodically checking the presence of NVIDIA driver and displaying notification message informing you that the connection with GPU is lost when the driver is being dynamically uninstalled during MSI Afterburner runtime
    Startup profile is now also affected by “Lock profiles” button, which means that you cannot modify or delete your startup overclocking settings while this button is pressed. This feature can be useful to protect startup overclocking settings from modification while temporarily testing various overclocking scenarios on overclocked system
    Added support for unofficial overclocking mode with disabled PowerPlay on PowerPlay7 capable hardware (AMD Tonga and newer graphics processors family)
    Added unofficial overclocking support for AMD Polaris architecture based graphics cards
    Added ability to use low-level hardware access interface on the systems with AMD graphics cards when legacy VGA BIOS image is not mapped to memory (e.g. in UEFI environment)
    Improved compatibility with the systems with both Overdrive 5 and Overdrive 6 API AMD graphics cards installed
    Added driver registry key detection for the secondary display adapters in SLI/Crossfire systems. Due to this improvement it is no longer necessary to temporarily disable Crossfire when altering some settings in “!MD compatibility properties” section (e.g. “Extend official overclocking limits” or “Enable ULPS” settings)
    Improved hardware polling and application startup time on ULPS-enabled Crossfire systems with AMD Fiji and newer AMD graphics processors
    Primary GPU usage is no longer cloned on all secondary GPU usage graphs on Crossfire systems when “Enable unified GPU usage monitoring” is enabled in “!MD compatibility properties”. Please take a note that only the primary GPU load is available on Crossfire systems when this option is enabled
    Updated IO driver provides more secure MMIO access interface
    Fixed bug causing the maximum value to be invisible on some hardware monitoring graphs under certain conditions (e.g. “Framerate” or “Frametime” graphs After closing 3D application)
    Added ability to define numpad keys as hotkeys when <Num Lock> in on
    Guru3D RivaTuner Statistics Server has been upgraded to v6.5.0

链接:https://pan.baidu.com/s/1gf2pFjX 密码:ig19

https://pan.baidu.com/s/1nvi0Deh

aaarice

这个好用么？？ 一直用EVGA那个 感觉现在版本不是很好用